Menu

Ring Sizes Conversion Chart


Ring sizes listed should only be used as a guide as each ring size can vary depending on a wearer's finger conditions.

There are several systems in use for denoting the sizes of jewellery rings around the world, it is best that a fitting or a special ring sizer used to find a comfortable fit.

Metric ring sizes are measured from their inner diameter or inner circumferences.

France ring sizes and German ring measurements are based on the diameter and circumference measurements, while other countries listed below have their own systems.


(diameter)
inch
(diam)
mm
(circumf)
inch
(circumf)
mm
US, CAN UK, AUS CHN, JPN SWZ
0.390 9.91 1.22 31.1 000      
0.422 10.72 1.32 33.7 00      
0.459 11.63 1.44 36.5 0      
0.466 11.84 1.46 37.2 ¼      
0.474 12.04 1.49 37.8 ½ A    
0.482 12.24 1.51 38.5 ¾    
0.49 12.45 1.54 39.1 1 B 1  
0.498 12.65 1.56 39.7    
0.506 12.85 1.59 40.4 C    
0.514 13.06 1.61 41.0    
0.522 13.26 1.64 41.7 2 D 2 1.5
0.53 13.46 1.67 42.3    
0.538 13.67 1.69 42.9 E 3 2.75
0.546 13.87 1.72 43.6    
0.554 14.07 1.74 44.2 3 F 4 4
0.562 14.27 1.77 44.8 5 5.25
0.57 14.48 1.79 45.5 G    
0.578 14.68 1.82 46.1 6 6.5
0.586 14.88 1.84 46.8 4 H 7  
0.594 15.09 1.87 47.4   7.75
0.602 15.29 1.89 48.0 I 8  
0.606 15.4 1.90 48.26      
0.61 15.49 1.92 48.7 J   9
0.618 15.70 1.94 49.3 5 9  
0.626 15.90 1.97 50.0 K   10
0.634 16.10 1.99 50.6 10  
0.642 16.31 2.02 51.2 L   11.75
0.65 16.51 2.04 51.9 6 11 12.75
0.658 16.71 2.07 52.5 M 12  
0.666 16.92 2.09 53.1 13 14
0.674 17.12 2.12 53.8 N    
0.682 17.32 2.14 54.4 7 14 15.25
0.69 17.53 2.17 55.1 O    
0.698 17.73 2.19 55.7 15 16.5
inch (d) mm (d) inch (c) mm (c) US, CAN UK, AUS CHN, JPN SWZ
0.706 17.93 2.22 56.3 P    
0.714 18.14 2.24 57.0 8 16 17.75
0.722 18.34 2.27 57.6 Q    
0.73 18.54 2.29 58.3 17  
0.738 18.75 2.32 58.9 R   19
0.746 18.95 2.34 59.5 9 18  
0.754 19.15 2.37 60.2 S   20.25
0.762 19.35 2.39 60.8 19  
0.77 19.56 2.42 61.4 T   21.5
0.778 19.76 2.44 62.1 10 20  
0.786 19.96 2.47 62.7 10¼ U 21  
0.794 20.17 2.49 63.4 10½ 22 22.75
0.802 20.37 2.52 64.0 10¾ V    
0.81 20.57 2.54 64.6 11 23  
0.818 20.78 2.57 65.3 11¼ W   25
0.826 20.98 2.59 65.9 11½ 24  
0.834 21.18 2.62 66.6 11¾ X    
0.842 21.39 2.65 67.2 12 25 27.5
0.85 21.59 2.67 67.8 12¼ Y    
0.858 21.79 2.70 68.5 12½ Z 26 28.75
0.866 22.00 2.72 69.1 12¾    
0.874 22.20 2.75 69.7 13   27  
0.882 22.40 2.77 70.4 13¼ Z1    
0.89 22.61 2.80 71.0 13½      
0.898 22.81 2.82 71.7 13¾ Z2    
0.906 23.01 2.85 72.3 14 Z3    
0.914 23.22 2.87 72.9 14¼      
0.922 23.42 2.90 73.6 14½ Z4    
0.93 23.62 2.92 74.2 14¾      
0.938 23.83 2.95 74.8 15      
0.946 24.03 2.97 75.5 15¼      
0.954 24.23 3.00 76.1 15½      
0.962 24.43 3.02 76.8 15¾      
0.97 24.64 3.05 77.4 16